Tag: 1542

Configure your multicast WAN for OTV

Leave a comment

It is easy to find design and configuration guides about OTV implementations on Nexus 7000 switches, ASR and CSR routers. But it is much harder to find some information about the requirements for your WAN.
Please read my previous blog posts about OTV here, here, here and here. I’ll cover the OTV device configurations in those posts. But for now, lets start with the DCI WAN for OTV.
First of all, there are two OTV deployment options:

  • Unicast mode
  • Multicast mode

The WAN requirements in unicast mode are simple: deliver unicast connectivity between the join interfaces of all OTV edge devices. This is just a simple straight forward configuration, I will not cover this in this blog post.
The multicast deployment is a bit harder to configure and requirements are less easier to find. This blog post will cover the required WAN configuration in a multicast deployment. In this particular scenario, we use dark fiber / DWDM connections as DCI to get a more clear understanding about the requirements and configuration.
First, a drawing to get a view on this deployment scenario:

OTV WAN multicast layout

OTV WAN multicast layout


This blog will provide you with the most easiest way to get your OTV multicast deployment up and running. There are some more finetune options available, but that will not be covered in this blog.
Read more

Configuring OTV on a Cisco ASR

63 comments

During a project I’ve been working on, we needed to configure OTV on a Cisco ASR. I did write a blog for configuring OTV on a Nexus 7000 before (click here) but the configuration on a Cisco ASR router is a bit different. The used technologies and basic configuration steps are equal, but the syntax is different for a few configuration steps .
Unfortunately, the documentation is not as good as for the Nexus 7000. I’ve found one good configuration guide (here) but this guide isn’t covering all. So, it’s a good reason to write a blog post about the basic OTV configuration on a Cisco ASR router.
For more information about OTV, check this website.
First, the network layout for this OTV network.
OTV Network layout
 
As you can see in the diagram, the ASR routers are back-to-back connected. There is no guideline how to connect these routers, as long as there is IP connectivity between them with multicast capabilities and a MTU of atleast 1542 btyes.
Read more