Cisco ISE is a identity management product of Cisco. In the upcoming weeks more blogposts about the configuration and implementation of Cisco ISE. See the Cisco website for more information about the use of this awesome product. Also, watch this youtube movie for a great introduction about the functionality.
The blogpost Agenda:
- Part 1: introduction
- Part 2: installation
- Part 3: Active Directory
- Part 4: High Availability
- Part 5: Configuring wired network devices
- Part 6: Policy enforcement and MAB
- Part 7: Configuring wireless network devices
- Part 8: Inline posture and VPN
- Part 9: Guest and web authentication
- Part 10: Profiling and posture
This week, part 1: a basic product introduction to ISE.
This information could be outdated, Cisco released new appliances!
There are 3 appliances available and a virtual machine based on VMware 4.x or 5.x.
- Cisco ISE 3315
- Cisco ISE 3355
- Cisco ISE 3395
- VM (specs based on physical hardware)
The ISE deployment is based on node roles. There are 4 node roles available:
- Inline posture
The admin node is for central management of the ISE deployment. Most of the configuration will be done on this node.
The monitoring node collects all monitoring events about all authentication and authorization attempts.
The policy node is the node which communicates with the endpoints and makes decisions about authentication and authorization. This is your radius server.
The inline role is used with devices which don’t have support for CoA (change of authority). Most of the recent Cisco switches do have support for CoA. The inline appliance can only be a physical appliance and can be in routed or bridged mode. The table below shows the device compatibility:
|Access switch||Minimum OS||MAB||802.1X||Web auth||CoA||VLAN||dACL|
|Catalyst 2940||IOS v12.1(22)EA1||Y||Y||–||–||Y||–|
|Catalyst 2950||IOS v12.1(22)EA1||–||Y||–||–||Y||–|
|Catalyst 2955||IOS v12.2(22)EA1||–||Y||–||–||Y||–|
|Catalyst 2960||IOS v12.2(52)EA1||Y||Y||Y||Y||Y||Y|
|Catalyst 2970||IOS v12.2(25)EA1||Y||Y||–||–||Y||–|
|Catalyst 2975||IOS v12.2(52)SE||Y||Y||Y||Y||Y||Y|
|Catalyst 3550||IOS v12.2(44)SE||Y||Y||–||–||Y||Y|
|Catalyst 3560-E||IOS v12.2(52)SE||Y||Y||Y||Y||Y||Y|
|Catalyst 3560-X||IOS v12.2(52)SE||Y||Y||Y||Y||Y||Y|
|Catalyst 3750||IOS v12.2(52)SE||Y||Y||Y||Y||Y||Y|
|Catalyst 3750-E||IOS v12.2(52)SE||Y||Y||Y||Y||Y||Y|
|Catalyst 3750-Metro||IOS v12.2(52)SE||Y||Y||Y||Y||Y||Y|
|Catalyst 3750-X||IOS v12.2(52)SE||Y||Y||Y||Y||Y||Y|
|Catalyst 4500||IOS v12.2(54)SG||Y||Y||Y||Y||Y||Y|
|Catalyst 6500||IOS v12.2(33)SXJ||Y||Y||Y||Y||Y||Y|
|Catalust 4900||IOS v12.1(54)SG||Y||Y||Y||Y||Y||Y|
|Nexus 7000||NX-OS 5.0(2)||–||–||–||–||Y||–|
|WLAN Controller WLC 2100, 4400, 5500||22.214.171.124||–||Y||Y||Y||Y||Y|
|WLC for ISR||126.96.36.199||–||Y||Y||Y||Y||Y|
|WLC for 3759||188.8.131.52||–||Y||Y||Y||Y||Y|
Most features of Cisco ISE require CoA!
Cisco ISE appliance roles can be combined or used on a single appliance. This depends on the ISE design. More policy nodes in your network means bigger an more administrations and montoring nodes. See this chart. In de left colomn the amount of endpoints, in the top colomn the amount of policy nodes.
There is a maximum of 2 admin nodes (active/standby, not hot-standby)
There is a maximum of 2 monitoring nodes (active/standby or HA)
Licensing is based on concurrent endpoints and on features.
The wireless license contains base + advanced features but for wireless only!
Some considerations for a ISE design:
- Only 1 Microsoft Active Directory membership per ISE deployment (at this point, version 1.1.x)
- Licensing is based on concurrent amount of endpoints
- Endpoint is a authenticated device, like a PC, Phone, Printer, iPad, etc
- Authentication of Microsoft AD, LDAP, EAP-TLS, Webbased authentication can be mixed.
- Profiling (detecting device type) and posture (health of an endpoint) is advanced license only
- Maximum of 2000 endpoints if you’re using 1 ISE appliance with all roles
- Maximum of 4000 endpoints (non-redundant) if you’re using 2 ISE appliances with all roles
If you’re using seperate nodes for the policy role, this are the maximum supported endpoints:
- 3315: 3000 endpoints
- 3355: 6000 endpoints
- 3395: 10.000 endpoints
When colocating admin and monitoring roles together, only 5 policy nodes in your deployment are supported!
When you’re using seperate admin and monitoring roles, both redundant, maximum 40 policy nodes are supported with a maximum of 100.000 endpoints.
These are some more limitations:
- 100.000 endpoints per ISE domain (deployment)
- Max 5 or 40 policy nodes
- Unlimited inline posture nodes
Performance of the deployment according Cisco, in authentications per second:
- PAP: 1431
- EAP-MD5: 600
- EAP-TLS: 335 internal, 124 LDAP
- LEAP: 455
- MSCHAPv1: 1064 internal, 361 AD
- MSCHAPv2: 1316 internal, 277 AD
- PEAP-MSCHAPv2: 181
- PEAP-GTC: 196 AD, 188 LDAP
- FAST-MSCHAPv2: 192
- GAST-GTC: 222
- Guest (Web auth): 17
- Policy services and monitoring: 1Mb/s
- Admin and monitoring: 256Kb/s
- Endpoints and policy: 125 Kb/s per endpoint
- Redundant monitoring pair: 256 Kb/s
- Admin and policy: 256Kb/s
I’ll start with the basic installation of the ISE software in part 2 of this Cisco ISE blog series.