It is easy to find design and configuration guides about OTV implementations on Nexus 7000 switches, ASR and CSR routers. But it is much harder to find some information about the requirements for your WAN.
Please read my previous blog posts about OTV here, here, here and here. I’ll cover the OTV device configurations in those posts. But for now, lets start with the DCI WAN for OTV.
First of all, there are two OTV deployment options:
- Unicast mode
- Multicast mode
The WAN requirements in unicast mode are simple: deliver unicast connectivity between the join interfaces of all OTV edge devices. This is just a simple straight forward configuration, I will not cover this in this blog post.
The multicast deployment is a bit harder to configure and requirements are less easier to find. This blog post will cover the required WAN configuration in a multicast deployment. In this particular scenario, we use dark fiber / DWDM connections as DCI to get a more clear understanding about the requirements and configuration.
First, a drawing to get a view on this deployment scenario:
This blog will provide you with the most easiest way to get your OTV multicast deployment up and running. There are some more finetune options available, but that will not be covered in this blog.